在瓷砖上打眼,这样做可以防止瓷砖开裂

时间:2019-07-21 来源: 国际新闻

First, how to make eye on the tiles?

e01dd52a2260401b92ce70c53e38962a

1. The position where the hole needs to be punched is pre-calibrated to ensure the level. (Note that there is no water and electricity line in the corresponding position in the wall).

2, when using a glass drill to punch holes in the tile, first tilt a direction to make a pit; otherwise the tile is too smooth and not well positioned; or not full tile, use a nail to directly make a small pit; It is best to use a plate that has holes (small size).

3, set a shallow mark to remove the positioning of the orifice plate, and then. Prepare a water bottle in advance, drill a hole in the bottle cap, and fill the bottle with water. Then, when punching, you should also moisten the water to the contact parts of the drill bit and the tile; especially for the full tile, there must be water.

4. There is no need to change the impact drill bit. Penetrate the tile section and continue to drill the screw depth. Pay attention to a hole, remove the glass drill bit, and unblock the hollow part of the blocked drill bit.

Second, how to prevent cracking of tiles?

57db357c59c44b9ba259d460f106688d

1. Drill your eyes at the place where the wall tiles are handed over, which will greatly reduce the cracking of the tiles.

2, you must not choose the place where the tile is used to make the eye, if you just choose to hit the eye at the tile, the tile is likely to crack.

3. When you are eye-catching, spray a sufficient amount of water at the location where you will be eye-catching. When the eye is punched on the tile, the temperature of the eye-catching portion rises sharply, which tends to cause cracking of the tile, and the water spray can appropriately lower the temperature of the tile and reduce the possibility of cracking.

Having said that, everyone understands? In fact, before the renovation, we should plan in advance which locations need to reserve brackets, so as to avoid subsequent troubles.

Third, how to repair the cracks in the tile?

e410264315cb42d5916a25bf1a012a84

xx瓷砖上的一些小裂缝通常不会影响使用。为了使裂缝变黑,它变得难看。我们需要尽早处理裂缝。如何修复破裂的瓷砖眼睛

1,采用玻璃胶加接缝,技术要求较高。

2,其实你可以用牙膏修复这些裂缝,轻轻挤出一些牙膏,用手指将牙膏均匀涂抹在裂缝上。用布或纸巾轻轻擦去多余的牙膏。当它干燥时,你的瓷砖墙就像新的一样。

3.如果瓷砖有颜色,请购买相应颜色的牙膏,或在白色牙膏中使用水粉颜料。应用瓦片间隙的效果是相同的。

4,瓷砖表面有裂缝和划痕,也可以用白色牙膏进行修复,涂抹几次,瓷砖表面的划痕都不见了。

四,瓷砖眼工具

d9839c071ab74a3c9ff0bcbc2de05b6d

混凝土墙通常由电锤制成。很快,只要你不打钢筋,你就可以在几十秒内制作一个8x10厘米的眼睛。

但是,瓷砖不能用电锤或冲击钻直接驱动,必须分两步进行:

在瓷砖上使用电钻(一般冲击钻采用平钻模式,良好的电锤,一定要打开平钻模式并操作),并插入一个特殊的玻璃/大理石开孔器。需要用水冷却钻头,这是覆盖矿泉水瓶中的孔的常用方法。否则,钻头会磨损,钻头会很快磨损。首先,由于瓷砖平滑钻头没有很好地定位,浅月牙可以在45度缓慢打开以进行定位。

在刺穿瓷砖之后,使用钻头显然效率较低,然后应用锤子或冲击钻。

原因是:

瓷砖相对脆弱。冲击钻和电锤的工作原理是在螺旋钻一侧的垂直冲击锤。在砖上很容易破碎瓷砖。

瓷砖非常硬,远高于混凝土,普通钻头很难钻。此外,装饰在砖墙上更受欢迎。例如,我的家就是将瓷砖粘合剂施加到墙上,具有高硬度和大厚度的瓷砖。如果使用锤钻,可以打洞超过10分钟。打瓷器。还有一个三角形钻头,称为特殊瓷砖。我试过了,效果不好,速度不快。玻璃钻头顶部有金刚砂,硬度高于金属,采用冲孔而不是打孔,效率明显更高,更安全。

新闻排行
  1. First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev

    First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev...

  2. First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev

    First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev...

  3. First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev

    First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev...

  4. First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev

    First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev...

  5. First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev

    First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev...

  6. First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev

    First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev...

  7. First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev

    First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev...

  8. First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev

    First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev...

  9. First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev

    First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev...

  10. First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev

    First,howtomakeeyeonthetiles?1.Thepositionwheretheholeneedstobepunchedispre-calibratedtoensurethelev...

日期归档
友情链接